BACnet PLC - C2.LPD.02

BACnet PLC – C2.LPD.02

  • Up to 2 channels phase cut dimmer
  • Selectable mode of operation either leading or trailing edge independently for each channel
  • Supports all types of dimmable light sources
  • Programmable device
  • Supported protocols: BACnet, Modbus RTU and Modbus ASCII
  • Programming is done using PC application
  • Configuration, programming and debugging through USB port
  • Standalone operation as an option
Category:

Description

Lighting Phase Cut Dimmer C2.LPD.04 designed for a wide range of tasks in building automation, Smart Home and Guest Room Management System, is a programmable and configurable Leading or Trailing edge phase cut dimmer.

It can work as an independent device or as a part of an overall building infrastructure. In latter case it communicates over BACnet or Modbus to the rest of the infrastructure. With the accompanying jPLCPRO software, it can be programmed and configured.

The device can be connected to BMS and supports 2 dimming channels. Each channel can be independently configured in leading or trailing edge mode.

 

Additional information

Electrical Specifications

title

Power supply

24 VDC for logic, 230 VAC for dimmer outputs

Maximum output current per channel

2.2 A

Total maximum input power

1012W

Communication Channel

title

RS 485

BACnet MS/TP or Modbus Slave RTU/ASCII. Programmable baud rate (9600, 19200, 38400, 76800, 115200), DIP switch selectable use of termination and polarization resistors

USB

USB device, mini USB connector, service port

Additional Specifications

title

Operating temperature

0.. +55 °C

Storage temperature

-30.. +85 °C

Operating humidity

Max 95% r.H., no condensation

Protection degree

IP20

Mounting

DIN rail, for indoor use only

Dimming mode

Selectable trailing or leading edge

Channels supported

2

Weight
300 g
Dimensions
107.6 x 90 x 62.2 mm

Downloads

Documentation

Technical Data Sheet for >PHASE CONTROL DIMMER - C2.LPD.02

PHASE CONTROL DIMMER - C2.LPD.02

EUROICC