RBFU 2.02 Field Unit

RBFU 2.02 Field Unit

  • Retrofit field unit for 1 smoke control damper
  • connects 1 smoke control damper to the Bustec Ringbus
  • provides a terminal connection for the Belimo BE230.. and BLE230 actuators
  • has a predefined address (no addressing required during system commissioning)
  • AC 230 V mains power
Category:

Description

RBFU 2.02 is used for controlling one Belimo 230 V smoke control damper actuator (BE230.., BLE230). The unit is connected to the Ringbus master controller via a 4 wire ring bus communication. Each unit has a predefined address and therefore has not to be addressed during the system commissioning. RBFU 2.02 unit is able to work without 230 V, but then it is only sending data about actuator position to Ringbus master controller and is not able to turn on/off the actuators.

Additional information

Nominal voltage range

AC 100 … 265 V

Maximal current through power terminal

10 A

For wire sizing

18 VA

Power consumption from mains

Actuator consumption + 50 mW

Power consumption from bus

5 mW

Connecting

Power supply terminal 2 x 3 x 2.5 mm²
2 x Actuator output terminal, 6 x 1.5 mm²
2 x Actuator power supply terminal, 3 x 1.5 mm²
2 x RingBus terminal 4 x 1.5 mm² wire

Wire stripping length

10 mm

Protection class

Class II (all insulated)

Degree of protection

IP54

EMC

CE according to 2004/108/EC

Low-voltage-directive

CE according to 2006/95/EC

Rated impulse voltage

2.5 kV

Control pollution degree

3

Type of action

Type 1

Software class

A

Ambient humidity range

max. 95 % r.H., non condensing

Ambient temperature range

–20 … +60°C

Non-operating temperature

–40 … +85°C

Maintenance

Maintenance-free

Weight
400 g
Dimensions
154 x 114 x 77 mm

Downloads

Technical Data Sheet for RBFU 2.02 Field Unit

EUROICC