RBCPU 1.03 OUT Module

RBCPU 1.03 OUT Module

  • Digital Output Module with 12 outputs
  • for the Ringbus master controller RBCPU 1.01
  • 12 non latching NO relay outputs grouped in 4 groups
  • LED status indication
  • 24 VAC (supplied by master controller)
  • hot pluggable
  • for DIN rail mounting
Category:

Description

The RBCPU 1.03 OUT Module has 12 non latching relay outputs (NO), grouped in 4 groups (each with a common ground). Each output has a LED status indication. The module is connected to the master controller via a build in plug terminal (hot pluggable). The outputs are set / reset on request of the master controller RBCPU 1.01. In case of a CPU failure, all outputs go into the off state. After power up sequence, the output state is user selectable.

Additional information

Electrical data

title

Nominal voltage

24 VAC supplied by master controller module RBCPU 1.01

Input current

10 mA max (at 24 VAC)

Number of outputs

12 non latchng relay outputs (NO), grouped in 4 groups (each with a common ground), LED status indication for each output

Galvanic isolation

Yes

Connecting

Terminal min. 0.5 mm² – max. 1.5 mm²

Max contact voltage

60 VDC, 125 VAC

Max contact current

1 A

Rated current

125 VAC, 0.5A
60 VDC, 0.3A
30 VDC, 1A

Insulation resistance

100 MΩ (500 VDC)

Operation time

5 ms

Release time

5 ms

Safety

title

Degree of protection

IP00

EMC

CE according to 2004/108/EC

Low-voltage-directive

CE according to 2006/95/EC

Ambient humidity range

95% according to IEC 60730-1

Ambient temperature range

0 … 50°C

Non-operating temperature

–40 … +85°C

Maintenance

Maintenance-free

Dimensions

title

Weight
120 g
Dimensions
84 x 84 x 23 mm

Downloads

Documentation

Technical Data Sheet for RBCPU 1.03 OUT Module

RBCPU 1.03 OUT Module

EUROICC